TruTool F 301

The TruTool F 301 seam locker is the perfect choice if you process sheet thicknesses of 0.018 in. - 0.04 in. in mild steel. For straight or curved ducts.

Simple closing of ducts in thin sheet range

With the TruTool F 301, you can close Pittsburgh seams effortlessly on straight or curved ducts with sheet thicknesses of 0.18 in. - 0.04 in. for mild steel. There is no need for refitting when processing formed or folded pieces. The adjustment to the sheet thickness is automatic and the forward feed guarantees a consistent and tight seam.

Easy to use

With the TruTool F 301 you can close formed or folded pieces without refitting the machine.

Flange height and sheet thickness

Suitable for flange heights of 8 mm – 11 mm and for sheet thicknesses of 0.45 – 1 mm.

Excellent process reliability

Automatic adjustment to the sheet thickness gives you consistent seam results.

Area of application

With the TruTool F 301, you can close seams on straight and curved ducts.

Maximum sheet thicknesses  
Maximum sheet thickness, steel 400 N/mm² (minimum) 0.45 mm
Maximum sheet thickness, steel 400 N/mm² (Maximum) 1 mm
Flange height (B)  
Flange height (B) with sheet thickness 0.45 - 1.0 8 mm - 11 mm
Radii  
Smallest inner radius (preformed) 150 mm
Smallest outer radius 300 mm
General  
Working speed (max.) 7 m/min
Nominal power consumption 550 W
Dimensions  
Length 285 mm
Height 356 mm
Weight  
Weight 5.2 kg

Order a call

Full Name: *

Phone: *