SOITAAB PLASMAtech Plasma RED
Reliable and high-performance automated plasma cutting system, designed for fast cutting of medium and thin sheets of iron, stainless steel, and aluminum, often used in the production of ventilation, air conditioning, and heating systems.
- Exceptional structural rigidity and positioning accuracy High cutting precision is achieved through a rigid welded gantry, high-precision guides, and dual brushless drives with longitudinal gantry control (gantry system). A key design feature is the completely independent cutting table, which is separated from the machine's guide rails. This eliminates the transfer of vibrations, mechanical loads, and thermal deformations from heated metal to the coordinate system.
- Intuitive control via the S.H.M.I. interface Proprietary software S.H.M.I. (Soitaab Human Machine Interface) with a 15-inch touchscreen is designed specifically to simplify operation as much as possible. The intuitive interface allows even an operator with minimal experience to quickly and accurately master the machine and utilize its full technological potential from the very first days of operation.
- Flexible technology integration and modularity The equipment offers unmatched customization options tailored to business tasks. For example, the top model in the line (Plasma NOVA) is the only solution on the market that combines plasma cutting, an oxy-fuel torch, drilling and tapping heads, beveling systems (bevel head), and up to 5 different types of part marking on a single gantry.
- Highest standards of safety and environmental friendliness Operator safety is ensured by a comprehensive protection system: from laser safety scanners and physical bumpers to special silicone curtains that absorb harmful ultraviolet radiation from the plasma. Clean air in the shop is maintained by a built-in zonal fume extraction system. Special dampers for the exhaust channels open automatically directly beneath the cutting area, efficiently removing gases and dust.
| Characteristic | Value |
|---|---|
| Maximum positioning speed | 40 m/min |
| Z-axis stroke (vertical) | 100 mm |
| Positioning accuracy (repeatability) | ±0.5 mm/m |
| Interface and CNC | Proprietary operator system S.H.M.I. with a 15-inch touchscreen control panel |
| Data transfer channels | USB, Ethernet, LAN |
| Frame and gantry construction | High-rigidity welded steel gantry; cutting table is fully independent from the coordinate system guides |
| Motion mechanics | Dual brushless drive on the longitudinal axis (gantry control), high-precision rack and pinion, ground linear guides with dual carriages |
| Cutting table and extraction | Modular split table with automatic zonal smoke extraction (dampers open directly under the carriage); dual-channel extraction for models 20x40 and larger |
| Dross/slag cleaning | Pull-out containers from the side of the table (top unloading optionally available) |
| Positioning and carriage | Automatic initial height sensing via ohmic sensor or mechanical contact; torch collision protection device (Breakaway) |
| Additional options (on request) | • PMT module (felt-tip pen marking) • T.C.T. Tubocut round tube cutting device • Cantilever (side) gantry extension |
(The height of all RED machines is 2100 mm)
- RED 15x30 (1.5 x 3.0 m): base 1987 x 4282 mm; gantry width 2478 mm
- RED 15x60 (1.5 x 6.0 m): base 1987 x 7657 mm; gantry width 2478 mm
- RED 20x40 (2.0 x 4.0 m): base 2487 x 5400 mm; gantry width 2978 mm
- RED 20x60 (2.0 x 6.0 m): base 2487 x 7657 mm; gantry width 2978 mm
- RED 20x80 (2.0 x 8.0 m): base 2487 x 9312 mm; gantry width 2978 mm
- RED 25x60 (2.5 x 6.0 m): base 2987 x 7657 mm; gantry width 3478 mm
- RED 25x80 (2.5 x 8.0 m): base 2987 x 9312 mm; gantry width 3478 mm
- RED 25x120 (2.5 x 12.0 m): base 2987 x 13800 mm; gantry width 3478 mm
SOITAAB — an Italian industrial group and recognized international leader in the design and manufacture of high-tech CNC machines for thermal cutting (plasma, oxy-fuel, waterjet, and laser), as well as industrial band saws. For many years, the company has successfully supplied equipment to all continents. The enterprise's operations are certified according to the ISO 9001 standard, and a permanent demonstration area operates directly at the factory in Milan, where customers from around the world can conduct real test cuts before purchasing.